Blok Handles by Tectura Designs: 4 different options depending on your needs. Also great for roof deck applications. All handles are made of steel in Wausau WI.
Made of 10-gauge HRCQ steel, Blok Handles are available for most Terra-Pavers. Precise sizing of the handle provides for easy manipulation during installation without harm to the paver or other components, while allowing for 3/16” (4.76 mm) joints. The handle also makes removal easy, should repairs to subsurface components be necessary. Available in nominal:
12” (30.48 cm), 18” (45.72 cm), 24” (60.96 cm)
Made of steel, unit is adjustable to work with 24” nominal (60.96 cm), 30” (76.2 cm), and 36” (91.44 cm) pavers. Requires two people to operate.
Takes the place of one handle, enabling one person to transport and place paver units. Made of steel, with a 16” x 6.5” pneumatic tire.
Makes installing concrete pavers fast and easy. Holds pavers upto 36" Enabling one person to transport and place paver units. Made of steel.
Installation requirements depend upon individual project needs. Tectura Designs, Inc. will recommend tools and techniques; however, contractors should have experience in the installation of similar systems. Grid layout and pattern are determined by the architect or installing contractor. Typical installations begin by determining a starting point based on pattern layout. Next, measurements are taken and chalk lines placed. Terra-Stands or Waffle Reducers are then placed at the intersections of the chalk line and adjusted as required. A Terra-Tab is placed on top of adjusted unit. Terra-Pavers are then set on Terra-Tabs. Should repair to the sub-structure be needed, Terra-Pavers are easily removed and replaced with the Blok Handle or Big-Blok Handle.
AVAILABILITY AND COST:
Terra-Stand and other components are delivered factory direct with Terra-Pavers. Prices quoted upon request.
Full Terra System One installation, using all components, carries a Three-Year Limited Warranty. Individual components are warranted as follows:
Terra-Pavers - Three-Year Limited Warranty
Blok Handles/Big-Blok Handles - One-Year Limited Warranty
Terra-Tab/Terr-Adjust/Extender/Reducer/Terra System One Mix - Three-Year Limited Warranty
A copy of the complete warranty is available upon request.
Warranties can be negotiated for extension.
Complete Terra System installations require periodic cleaning by use of high-pressure water system to rinse off debris. Regular maintenance also includes adjustment of pavers that may have shifted or been damaged. Installations over waterproof membranes allow for access to the substrate for maintenance. Drains should be cleaned as needed to prevent water back up.
Consultation services are available for all Terra System One applications, including paver selection, project design, and installation recommendations. Contact Tectura Designs's Terra-Paving Division for any assistance.