Terra Stand Pedestal

Jump to Technical Information

Our Terra Stand paver pedestal roof system lets you make the most of rooftop surface space.

Material: High impact copolymer polypropelene
Special Features: 4 sizes to choose from. All can be cut to size.
Terra System One provides a level surface for installation of concrete pavers over a pitched surface or roof. The system ensures precise paver alignment and even spacing that allows for drainage and air circulation critical to the health of a deck installed over any waterproof membrane. It also allows for easier access to the subsurface for scheduled maintenance or repairs without damage to the paved surface. Terra-Stand can also be installed at grade level where the surface is not pitched.

Components and Materials:
The Terra-Stand is made of a high impact copolymer polypropelene adjusting from 2” to 21” in height and slope compensating up to 5/8” to provide a level installation. Outside base dimension of 7” x 7” provides contact surface of 49” square. It is installed on previously established grid lines, adjusted for height and slope and ready for installation. Load of 3,000 lbs per pedestal.
Basic Use:
Terra-Stand is designed for exterior application using Tectura Designs Pavers on pitched roof decks, plazas, roof plazas, parking garages, roof terraces, and more.

An average project will require one Terra-Stand for each Tectura Designs Paver, plus the perimeter.

Item Number: 
Installation Specifications: 


Installation requirements depend upon individual project needs. Tectura Designs, Inc. will recommend tools and techniques; however, contractors should have experience in the installation of similar systems. Grid layout and pattern are determined by the architect or installing contractor. Typical installations begin by determining a starting point based on pattern layout. Next, measurements are taken and chalk lines placed. Terra-Stands or Waffle Reducers are then placed at the intersections of the chalk line and adjusted as required. A Terra-Tab is placed on top of adjusted unit. Terra-Pavers are then set on Terra-Tabs. Should repair to the sub-structure be needed, Terra-Pavers are easily removed and replaced with the Blok Handle or Big-Blok Handle.


Terra-Stand and other components are delivered factory direct with Terra-Pavers. Prices quoted upon request.


Full Terra System One installation, using all components, carries a Three-Year Limited Warranty. Individual components are warranted as follows:

Terra-Pavers - Three-Year Limited Warranty
Blok Handles/Big-Blok Handles - One-Year Limited Warranty
Terra-Tab/Terr-Adjust/Extender/Reducer/Terra System One Mix - Three-Year Limited Warranty

A copy of the complete warranty is available upon request.
Warranties can be negotiated for extension.


Complete Terra System installations require periodic cleaning by use of high-pressure water system to rinse off debris. Regular maintenance also includes adjustment of pavers that may have shifted or been damaged. Installations over waterproof membranes allow for access to the substrate for maintenance. Drains should be cleaned as needed to prevent water back up.


Consultation services are available for all Terra System One applications, including paver selection, project design, and installation recommendations. Contact Tectura Designs' Terra-Paving Division for any assistance.